Extreme Networks ISW-Series Industrial Ethernet Switches
Designed for industrial use, Extreme Industrial Switches provide continuous uptime, manageability and operational efficiency. With full PoE+ power per port, each switch offers the performance needed for todays power-hungry CCTV devices and WLAN access points.
Extreme Industrial Switches are an excellent choice for industrial environments, intelligent transportation systems, utilities, and smart cities. Full redundant ring technology creates fault-tolerant networks with high availability with industry standard technologies.
-
FEATURES
- Highly Resilient network redundant LACP, Spanning tree STP, RSTP & MSTP, and quick Ring fail-over protection
- Port-based /tag-based VLAN, IEEE 802.1ad/QinQ VLAN, Add/remove VLAN tags
- Multicasting support IGMP v1/v2, v3 proxy and snooping
- Multicast/Broadcast/Flooding Storm Control
- IEEE802.1x access control
- Per VLAN mirroring
- CLI/Web/SNMP management interfaces
- PoE PSE power management and PD power consumption
-
FORM FACTOR
- DIN Rail or Wall Mountable
- Rugged IP30 Enclosure
-
MODELS
- 4 10/100 POE+ ports, 2 10/100 ports, and 2 100FX/1000Base-X SFP ports
- 8 10/100 POE+ ports, and 4 100FX/1000Base-X SFP ports
- 4 10/100/1000 POE+ ports, 2 10 10/100/1000 ports, and 2 100FX/1000Base-X SFP ports
- 8 10/100 POE+ ports, and 4 100FX/1000Base-X SFP ports
-
PERFORMANCE
- Full Wire Speed Layer 2 Switching
- All PoE ports IEEE 802.3af and 802.3at compliant and support up to 30W concurrently
- Dual DC power input & Reverse power protection
- -40°C to +75°C operating temperature
OPERATING MODE
- Store and forward, L2 wire-speed/non-blocking switching engine
- MAC Addresses- 8K
- Jumbo Frames- 9K Bytes
COPPER RJ45 PORTS
- Speed- 10/100 Mbps or 10/100/1000 Mbps
- MDI/MDIX Auto-Crossover
- Auto-negotiation, full and half duplex
- Ethernet Isolation- 1500VRMS 1 minute
- All PoE ports IEEE 802.3af and 802.3at compliant and support up to 30W concurrently
PLUGGABLE SFP PORTS
- 100FX SFP and 100/1000BaseX Transceiver
NETWORK REDUNDANCY
- Fast Failover Ring Protection with single and multiple rings, ring coupling, dual homing and chain
- IEEE 802.1D STP, IEEE 802.1w RSTP, IEEE 802.1s MSTP
- Static trunk or Dynamic via LACP (Link Aggregation Control Protocol)
BRIDGING, VLANS, MULTICAST
- Flow Control IEEE 802.3x (Full Duplex) and Back-Pressure (Half Duplex)
- VLAN Capacity- 1024
- Port-based VLANs; MAC-based VLANs; IP Subnet-based VLANs
- Protocol-based VLANs
- IEEE 802.1Q tag-based VLANs
- IEEE 802.1ad Double Tagging (Q in Q)
- IGMP v1, v2, v3 with up to 1000 multicast groups
- IGMP snooping and querying
- Immediate leave and leave proxy
- Throttling and filtering
- IEEE 802.1ab Link layer Discovery Protocol (LLDP)
TRAFFIC MANAGEMENT AND QOS
- Priority- IEEE 802.1p QoS
- Queues per port- 8
- Scheduling – Strict, Weighted Round Robin
- Port-based shaping
SECURITY
- Port Security- IP and MAC-based access control, IEEE 802.1X authentication Network Access Control, RADIUS and TACACS+ AAA (Authentication, Accounting and Authorization)
- Storm Control- Multicast/Broadcast/Flooding Storm Control
MANAGEMENT
- CLI
- GUI
- SNMP v1, v2c, v3
- Telnet
- Management Security- HTTPs, SSH, RADIUS client for management
- FTP- Configuration Import/Export, Firmware Upgrade
- SYSLOG
- Per VLAN mirroring
- Ethernet Copper Diagnostics
- DDMI for SFP ports
- MIBs- RFC 1757 RMON 1,2,3,9; RFC 2674 Q-Bridge MIB, RFC-1213 MIB-II; RFC-1493 Bridge MIB; RFC 2233 IF MIB
- DHCP- Client, Server, Relay, Snooping, Option 82
- NTP and SNTP
- PoE scheduling, power control, PoE PD power consumption
POWER
- Redundant Input Terminals
- Input voltage range- 46-58VDC (50-58VDC for optimal 30W PoE performance)
- Reverse Power Protection
- Transient Protection- >15K Watts peak
- Power Consumption- 15 Watts without PD loading
LEDS
- Power input status
- Ethernet link and speed status