• Zebra AP 8122  802.11N Access Point

Zebra AP 8122 802.11N Access Point

WIRELESS NETWORKS FOR CUSTOMER-FACING SPACES

SLEEK DESIGN DELIVERS NEXT GENERATION HIGH PERFORMANCE WI-FI IN YOUR MOST DESIGN-CONSCIOUS ENVIRONMENTS
Retail stores, hotels, hospitals and schools all have one thing in common: they all need to provide wireless connections not only for their own workers, but also to the customers, patients and students they serve — and performance expectations are at an all time high.

Now, with Symbol’s AP 8122 access point, you can deliver dependable speeds to virtually any number of mobile devices running the most demanding applications. With its sleek housing, understated design and internal antennas, the AP 8122 blends right into your indoor environment — including the most fashionable high-end retail store. The next generation 802.11n radios empowers your network with reliable Wi-Fi for every mobile device in use in your operation today. And with our high-powered radios, you’ll need fewer access points. The result? A new level of capacity and performance for your wireless LAN — all at a lower cost.

  • 3-spatial stream 3X3 MIMO Access Point

    Delivers maximum throughput to support virtually any enterprise application, including voice and HD video

  • 802.11n operation with standard 802.3af

    Simplifies and reduces total cost of installation using standard Power-over- Ethernet (PoE)

  • Band-unlocked dual band design

    Lets you increase security without increasing costs. Band-unlocked radios enable 24×7 dual band Wireless IPS sensing on both 2.4 GHz and 5 GHz with concurrent 802.11a/b/g/n client access and mesh

  • Load balancing, pre-emptive roaming and rate scaling

    Increases reliability and resilience of the wireless network to support mission critical applications

  • UNLEASH OPTIMAL

    Zebra’s WiNG 5 WLAN solutions offer all the benefits of 802.11n — and then some. Our distributed architecture extends QoS, security and mobility services to the APs so you get better direct routing and network resilience. That means no bottleneck at the wireless controller, no latency issues for voice applications and no jitter in your streaming video. And with our broad selection of access points and flexible network configurations, you get the network you need with less hardware to buy.

Physical Characteristics

Available mounting

No additional hardware required to mount
(bracket included)

Configurations

Under ceiling or on wall

Console port

RJ45 Console Port

Dimensions

9.0 in. L x 6.0 in. W x 1.77 in. H 230 mm L x 153 mm W x 45 mm H

Housing

Metal and plastic

LEDs activity indication

2 top mounted LEDs

Uplink

1 port (GE1) Auto-sensing
10/100/1000Base-T Ethernet; 802.1at on GE1 LAN port

Weight

3.41 lbs/1.55 kg

Radio Specifications and Networking

Antenna configuration

3×3 MIMO (transmit/receive on all three antennas) and green mode (dynamical antenna selection).

Data rates supported

802.11b/g: 1,2,5.5,11,6,9,12,18,24,36,48, and 54Mbps 802.11a: 6,9,12,18,24,36,48, and 54Mbps 802.11n: MCS 0-23 up to 450Mbps

Maximum available transmit power per AP (composite, 0dBi antenna)

2.4GHz: 27.7dBm
5.2GHz: 24.7dBm

Maximum available transmit power per chain (conducted)

2.4GHz: 23dBm
5.2GHz: 20dBm

Network standards

IEEE 802.11a/b/g/n, 802.11d and 802.11i WPA2, WMM and WMM-UAPSD

Operating channels

2.4GHz band: channel 1 through channel 13;
5.2GHz band: channel 36 through channel 165.
* Channel availability depends on local regulatory restriction

Operating frequencies

2412 to 2472Mhz, 5180 to 5825 MHz

Transmit power adjustment

1dB increment from 0dBm to max.

Wireless medium

Direct Sequence Spread Spectrum (DSSS),
Orthogonal Frequency Division Multiplexing (OFDM) and Spatial multiplexing (MIMO)

Technology

802.11N CAPABILITIES

3X3 MIMO with 3 Spatial Streams
20 MHz and 40 MHz Channels
450 Mbps Data Rates per Radio
Packet Aggregation (AMSDU, AMPDU)
Reduced Interface Spacing
802.11 DFS
MIMO Power Save (Static and Dynamic)
Advanced forward error correction coding: STBC, LDPC

User Environment

Electrostatic discharge

15kV air, 8kV contact

Operating humidity

5 to 95% RH non-condensing

Operating Temp.

32° F to 104° F/0° C to 40° C

Storage Temp.

-40° F to 185° F/-40° C to 85° C

No downloads are available for this product

Request a Quote

Ready to talk?

Contact us today to help develop the right communications solution for your business.
Scroll to Top